
How Does IVF Work? From Eggs and Sperm to Embryo Development

Manar Hegazy

Majd Eddin Khaled
In vitro fertilization (IVF) is based on a simple principle: instead of waiting for an egg and sperm to meet inside the fallopian tube, eggs are collected from the ovaries and brought into an embryology laboratory, where fertilization and the earliest stages of embryo development can take place before an embryo is transferred to the uterus or frozen for future use.
A significant part of IVF therefore takes place not in an examination room but inside a specialized laboratory where eggs, sperm, and embryos are handled under carefully controlled conditions.
This article focuses on what happens to the eggs, sperm, and embryos inside the IVF laboratory, rather than the patient's daily injection and appointment schedule.
For the clinical treatment journey, read The IVF Process Step by Step: From Ovarian Stimulation to Embryo Transfer.
Why Does IVF Usually Aim to Retrieve Several Eggs?
In a natural menstrual cycle, usually one dominant follicle releases one egg.
During IVF, medication is commonly used to encourage several follicles to develop.
This is important because there is natural attrition at every subsequent stage:
Not every follicle contains a usable egg.
Not every retrieved egg is mature.
Not every mature egg fertilizes.
Not every fertilized egg continues developing.
Not every developing embryo becomes suitable for transfer or freezing.
The number of embryos at the end of a cycle will therefore usually be lower than the original follicle or egg count.
What Happens to the Eggs After Retrieval?
After follicular fluid is collected, the embryology team identifies the eggs within it.
The eggs are placed in an appropriate laboratory environment and assessed according to the planned fertilization method.
If ICSI is being used, the embryologist generally evaluates egg maturity because injection is performed on suitable mature eggs.
With conventional IVF, laboratory handling differs because prepared sperm are placed with the eggs rather than one sperm being injected into each egg.
Why Is the Mature Egg Count Lower Than the Retrieved Egg Count?
Eggs within follicles do not all reach the same stage of maturity at the same time.
A retrieval can therefore produce:
Mature eggs.
Immature eggs.
Follicles that do not yield a usable egg.
A lower mature-oocyte count than the total retrieved count is therefore not automatically a laboratory problem.
It is one of the normal selection stages within IVF.
What Happens to the Semen Sample?
Semen is processed before fertilization.
The laboratory prepares sperm suitable for use and separates them from components of seminal fluid that are not needed for the laboratory procedure.
The preparation method can depend on:
Semen-analysis findings.
The fertilization technique.
Whether sperm are fresh or frozen.
The source of sperm in special circumstances.
Once the sample is prepared, fertilization can proceed.
How Does Fertilization Occur in Conventional IVF?
In conventional IVF, eggs are placed with an appropriate concentration of prepared sperm.
A sperm then needs to interact with and penetrate the egg for fertilization to occur.
This differs from ICSI, where the embryologist directly injects a sperm into the egg.
What Happens During ICSI?
With intracytoplasmic sperm injection (ICSI), an embryologist selects a sperm and injects it directly into a mature egg using specialized microscopic equipment.
ICSI may be appropriate in selected situations, including some forms of male-factor infertility or when there is another reason to use assisted fertilization.
However, ICSI is not automatically better for every IVF cycle, and it cannot guarantee fertilization or pregnancy.
Read IVF vs ICSI: What Is the Difference and When Is Each Used?.
When Do Embryologists Know Whether Fertilization Occurred?
After fertilization has been attempted, the eggs are checked for signs of normal fertilization.
Normally fertilized eggs typically show two pronuclei, representing the maternal and paternal genetic contributions before the first cell division.
The laboratory can therefore distinguish between:
Normally fertilized eggs.
Eggs that did not fertilize.
Abnormally fertilized eggs that are not treated as normal embryos.
The embryo count therefore begins with normally fertilized eggs rather than the original number retrieved.
Why Do Some Mature Eggs Fail to Fertilize?
Even a mature egg exposed to appropriate sperm does not always fertilize.
Fertilization can be influenced by factors involving:
The egg.
The sperm.
Previous fertilization history.
Biological characteristics that cannot always be predicted beforehand.
It is therefore expected that the fertilized-egg count may be lower than the mature-oocyte count.
Unexpectedly poor fertilization can become important information when planning a future cycle.
What Happens After Fertilization?
After normal fertilization, the embryo begins dividing.
Embryologists observe development over the following days while embryos remain in controlled incubator conditions.
Embryos do not all develop at the same rate or with the same morphology.
Some continue developing appropriately, while others slow down or stop.
This biological attrition does not automatically indicate a laboratory error.
What Is a Day-3 Embryo?
During the first days after fertilization, the embryo divides into multiple cells.
The laboratory can assess features such as:
Cell number.
Division pattern.
Cell appearance.
Other morphological characteristics.
However, appearance alone cannot confirm chromosome status or guarantee pregnancy.
What Is a Blastocyst?
An embryo that continues developing may reach the blastocyst stage, commonly around day five or six after fertilization.
Blastocyst culture gives the laboratory additional information about which embryos continue developing over several days.
However, not every fertilized egg reaches this stage.
HFEA describes IVF embryos as being cultured for several days before an embryo is selected for transfer.
Why Does the Embryo Number Decrease?
This is one of the most common concerns during IVF.
A cycle may progress through:
retrieved eggs → mature eggs → normally fertilized eggs → developing embryos → blastocysts.
The decrease between stages does not mean embryos have simply been “lost.”
Not every egg or embryo has the biological capacity to continue developing.
Each stage should therefore be interpreted relative to the number entering that stage.
How Are Embryos Graded?
Embryology laboratories use grading systems to describe embryo development and morphology.
At the blastocyst stage, assessment may include:
Degree of blastocyst expansion.
Inner cell mass.
Trophectoderm appearance.
Grading helps the team rank embryos for transfer or freezing.
However, an embryo grade is not a pregnancy result.
An excellent-looking embryo can fail to implant, while a lower-graded embryo can result in a healthy birth.
Does Embryo Appearance Tell Us Its Chromosome Status?
No.
Morphological grading evaluates how the embryo looks and develops under the microscope.
It does not directly reveal chromosome number.
A morphologically excellent embryo can still have a chromosomal abnormality.
Morphology and chromosomal status should therefore be understood as different types of information.

Where Does PGT Fit Into IVF?
When preimplantation genetic testing is part of the treatment plan, a small sample of cells can be taken from an embryo at an appropriate developmental stage and sent for genetic analysis.
Embryos are generally frozen while results are awaited.
PGT is not a mandatory step in every IVF cycle.
Its use depends on the medical indication, type of testing, embryo availability, reproductive history, and other individual factors.
What Does Embryo Freezing Mean?
Embryos suitable for later use can be cryopreserved.
Modern IVF laboratories commonly use vitrification, a rapid-freezing technique designed to minimize damaging ice-crystal formation.
Embryos may be frozen because:
Additional suitable embryos remain after transfer planning.
Transfer will occur in a later cycle.
Genetic testing is planned.
A medical reason makes fresh transfer less appropriate.
Freezing embryos does not mean the IVF cycle has failed.
Fresh vs Frozen Embryo Transfer
With fresh transfer, an embryo is transferred during the same treatment cycle as egg retrieval.
With frozen embryo transfer, embryos are cryopreserved and the uterus is prepared in a later cycle before an embryo is warmed and transferred.
The choice can depend on ovarian response, hormone levels, endometrial conditions, OHSS risk, genetic testing, and the overall treatment strategy.
No single approach is automatically best for every patient.
What Happens When a Frozen Embryo Is Used?
When transfer is planned, the embryo is removed from cryostorage and warmed according to the laboratory's validated protocol.
The embryologist evaluates the embryo after warming before transfer.
Embryo freezing and warming require careful procedures for handling, tracking, and identification.
Professional laboratory guidance recommends defined protocols for oocyte and embryo handling, fertilization, embryo culture, cryopreservation, warming, and transfer.
How Does the Laboratory Prevent Sample Mix-Ups?
Identification and witnessing are critical components of IVF laboratory safety.
Laboratories use systems to verify samples during important procedures.
Witnessing may involve:
Two trained staff members.
Electronic witnessing systems.
Or a combination according to laboratory procedures.
Critical identification points can include:
Egg collection and handling.
Sperm preparation.
Fertilization or ICSI.
Movement of embryos between dishes.
Embryo biopsy.
Freezing and warming.
Embryo transfer.
ASRM specifically recommends witnessing or electronic verification during critical IVF laboratory procedures.
Do Modern Laboratory Devices Guarantee IVF Success?
No.
Technology is important, but laboratory quality cannot be reduced to one incubator, microscope, or device.
It depends on a complete system that includes:
Trained embryologists.
Environmental monitoring.
Incubation conditions.
Temperature and gas control.
Culture systems.
Handling techniques.
Quality-control procedures.
Sample identification.
Freezing and warming protocols.
A clinic should therefore not be judged solely by a single advertised laboratory technology.
Can the Laboratory Improve the Biological Quality of an Egg or Embryo?
The laboratory can provide an environment designed to support fertilization and embryo development.
However, it cannot rewrite the fundamental biology of an egg, sperm, or embryo.
The laboratory cannot:
Make a chromosomally abnormal egg normal.
Guarantee every mature egg will fertilize.
Force every embryo to become a blastocyst.
Guarantee implantation of a good-looking embryo.
Its role is to provide appropriate conditions and accurately observe and manage the biological process.
How Is an Embryo Selected for Transfer?
Selection can take into account:
Developmental stage.
Morphological assessment.
Number of available embryos.
Previous treatment history.
Genetic-testing results when available.
The agreed embryo-transfer strategy.
The number of embryos transferred also needs to consider multiple-pregnancy risk.
Does “Best Embryo” Simply Mean the Highest Grade?
Not always.
Embryo grade is one piece of information.
Selection may also consider:
The day the embryo reached the blastocyst stage.
Its developmental pattern.
Genetic-test results when performed.
Patient history.
Other embryos available.
Embryo selection is therefore a combined laboratory and clinical decision.
What Happens After Embryo Transfer?
Once an embryo has been placed in the uterus, the laboratory's direct role in that cycle is largely complete.
The embryo still needs to:
Continue developing.
Interact with the endometrium.
Implant.
Establish an ongoing pregnancy.
A well-developed embryo is therefore important, but it cannot guarantee pregnancy.
Why Should Patients Understand the Laboratory Stages?
Understanding the laboratory process helps patients interpret cycle results more realistically.
Instead of asking only:
“How many eggs did we retrieve?”
more informative questions include:
How many eggs were mature?
How many fertilized normally?
How did the embryos develop?
How many reached the blastocyst stage?
How were they graded?
Are there additional embryos suitable for freezing?
These numbers can help identify where a cycle progressed as expected and where future review may be useful.
Read Factors That Affect IVF Success: From Egg Quality to Embryo Implantation.
Conclusion
IVF is much more than egg retrieval followed by embryo transfer.
Between those stages, the embryology laboratory identifies and assesses eggs, prepares sperm, performs fertilization using the appropriate method, monitors embryo development, and helps select embryos for transfer or freezing.
Not every egg progresses to the next stage. It is normal for the numbers to decrease from retrieved eggs to mature eggs, fertilized eggs, developing embryos, and blastocysts.
Embryologists use developmental and morphological information to guide embryo selection, while techniques such as ICSI, genetic testing, or vitrification are added when appropriate to the individual treatment plan.
Understanding these stages helps patients interpret an IVF cycle based on the entire laboratory pathway rather than only the original egg count or one embryo grade.
At Fertiliv, egg maturity, fertilization, embryo development, freezing, and transfer planning are reviewed together so that laboratory findings can be integrated into the clinical treatment plan.
Frequently Asked Questions
Does Every Retrieved Egg Become an Embryo?
No. Some eggs are immature, some mature eggs do not fertilize, and some fertilized embryos stop developing before reaching a stage suitable for transfer or freezing.
What Is the Laboratory Difference Between IVF and ICSI?
In conventional IVF, prepared sperm are placed with the eggs and fertilization occurs through sperm-egg interaction. In ICSI, an embryologist injects one sperm directly into a mature egg.
Does an Excellent Embryo Grade Guarantee Pregnancy?
No. Embryo grading helps with selection, but it cannot guarantee implantation, chromosome status, or live birth.
Why Don't All Embryos Reach Day Five?
Some embryos stop developing during the first several days because of biological factors. This attrition is a recognized part of embryo development and does not automatically indicate laboratory error.
Are All Embryos Frozen?
No. Embryos suitable for future use may be frozen depending on the treatment strategy, whether a fresh transfer is planned, genetic testing, and other medical considerations.
